Menu item
Network Buffer
Auto
3K to <maximum size allowed>
Mac Binary PS
On
Off
Auto
Std Network Setup
Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
NetWare
Net <x> Setup
Reports
Network Card
TCP/IP
IPv6
Wireless
Apple Talk
NetWare
Reports menu (under the Network/Ports menu)
The Reports menu item is available from the Network/Ports menu:
Description
Sets the size of the network input buffer
Notes:
Auto is the factory default setting.
•
The value can be changed in 1K increments.
•
The maximum size allowed depends on the amount of memory in the printer,
•
the size of the other link buffers, and whether Resource Save is set to On or
Off.
To increase the maximum size range for the Network Buffer, disable or reduce
•
the size of the parallel and USB buffers.
Changing this setting from the printer control panel and then exiting the
•
menus causes the printer to restart. The menu selection is updated.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
Auto is the factory default setting.
•
The Off setting filters print jobs using the standard protocol.
•
The On setting processes raw binary PostScript print jobs.
•
For descriptions and settings of the network setup menus, see the following:
"Reports menu (under the Network/Ports menu)" on page 166
•
"Network Card menu" on page 167
•
"TCP/IP menu" on page 167
•
"IPv6 menu" on page 169
•
"Wireless menu" on page 169
•
"AppleTalk menu" on page 170
•
"NetWare menu" on page 170
•
Note: The Wireless menu appears only when the printer is connected to a wireless
network.
Understanding printer menus
166