Parallel Menu - Dell 3335dn User Manual

Menu item
USB Buffer
Disabled
Auto
3K to <maximum size allowed>
Mac Binary PS
On
Off
Auto
USB With ENA
ENA Address
ENA Netmask
ENA Gateway

Parallel menu

This menu appears only if an optional parallel card is installed.
Menu item
PCL SmartSwitch
On
Off
Description
Sets the size of the USB input buffer
Notes:
Auto is the factory default setting.
•
The Disabled setting turns off job buffering. Any jobs already buffered on the
•
disk are printed before normal processing is resumed.
The USB buffer size value can be changed in 1-K increments.
•
The maximum size allowed depends on the amount of memory in the printer,
•
the size of the other link buffers, and whether the Resource Save setting is On
or Off.
To increase the maximum size range for the USB Buffer, disable or reduce the
•
size of the parallel, serial, and network buffers.
Changing this setting from the printer control panel and then exiting the menus
•
causes the printer to restart. The menu selection is updated.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
Auto is the factory default setting.
•
The Off setting filters print jobs using the standard protocol.
•
The On setting processes raw binary PostScript print jobs.
•
Sets the network address, netmask, or gateway information for an external print
server that is attached to the printer using a USB cable.
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
Description
Sets the printer to automatically switch to PCL emulation when a print job received
through a parallel port requires it, regardless of the default printer language
Notes:
On is the factory default setting.
•
When the Off setting is used, the printer does not examine incoming data.
•
When the Off setting is used, the printer uses PostScript emulation if PS
•
SmartSwitch is set to On. It uses the default printer language specified in the
Setup menu if PS SmartSwitch is set to Off.
Understanding printer menus
172