Default Settings - D-Link AirPremier DWL-2210AP Manual

Prelaunch Checklist

Default Settings:

Option
System Name
User Name
Password
Network Name (SSID)
Network Time Protocol
(NTP)
IP Address
Default Settings
DWL-2210AP
admin
The user name is read-only. It
cannot be modified.
admin
Internal interface: "default"
Guest interface:
"default (guest)"
None
192.168.0.50
The default IP address is used if
you do not use a Dynamic Host
Configuration Protocol (DHCP)
server. You can assign a new
static IP address through the
Administration Web pages.
If you have a
network, then an IP address will
be dynamically assigned by the
server at AP startup.
Related Information
DHCP server on the
10 10
"Setting the DNS Name" in
"Setting the Ethernet (Wired)
Interface"
"Provide Administrator Password
and Wireless Network Name"
in "Configuring Basic Settings"
and "Setting the Administrator
Password"
"Review / Describe the Access
Point" in "Configuring Basic
Settings."
"Configuring Internal LAN
Wireless Settings" in "Setting the
Wireless Interface."
"Configuring Guest Network
Wireless Settings" in
"Setting the Wireless Interface."
"Enabling the Network Time
Protocol Server."
Option Default Settings Related
Information