D-Link AirPremier DWL-2210AP Manual page 103

Configuring Queues for Qualty of Service (QoS)
Field
Queue
Inter-Frame Space
Description
Queues are defined for different types of data transmitted from
AP-to-station:
Data 0 (bulk)
Lowest priority queue, high throughput. Bulk data that requires
maximum throughput and is not time-sensitive is sent to this
queue (FTP data, for example).
For information purposes, the hexadecimal values to describe
this queue are in the following ranges:
0X02 - 0X03
0X08 - 0X0F
Data 1 (best effort)
Medium priority queue, medium throughput and delay. Most
traditional IP data is sent to this queue.
For information purposes, the hexadecimal values to describe
this queue are in the following ranges:
0x00 - 0X01
0X04 - 0X07
0X18 - 0X1F
Data 2 (interactive)
Highest priority queue, minimum delay. Time-sensitive data
such as VoIP and streaming media are automatically sent to this
queue.
For information purposes, the hexadecimal values to describe
this queue are in the following ranges:
0x10 - 0X17
Data 3 (not used)
For more information, see "QoS Queues and Parameters to
Coordinate Traffic Flow" in this manual.
The Interframe Space specifies a wait time (in milliseconds) for
data frames.
For more information, see "DCF Control of Data Frames and
Interframe Spaces" in this manual.
103