D-Link AirPremier DWL-2210AP Manual page 25

Quick Steps for Setup
Step 4b. Log on to the Administration Web pages without
Kickstart, in a non-DHCP network
When the DWL-2210AP is installed in a network with no DHCP server, after configuring
your computer's static IP address to be within the IP address range of the DWL-2210AP,
you will enter the IP address of the DWL-2210AP into the address field of your web
browser; the browser window shown below will appear.
Field Default Setting
Field Default Setting
Username
admin
Password
admin
The user name is read-only.
It cannot be modified.
Enter the username and password and
click OK.
Viewing Basic Settings for Access Points
When you first log in, the
is displayed. These are global settings for all access points that are members of the
cluster and, if automatic configuration is specified, for any new access points that are
added later.
Basic Settings
page for D-Link DWL-2210AP administration
25