D-Link AirPremier DWL-2210AP Manual page 23

Quick Steps for Setup
Step 3. Run KickStart Wizard (continued)
Click Next to search for access
points.
2.Wait for the search to complete,
or until the KickStart Wizard has
found your new access points.
If no access points are found, Kickstart
indicates this and presents some
troubleshooting information about your
LAN and power connections. Once you
have checked hardware power and
Ethernet connections, you can click the
Kickstart Back button to search again for
access points.
3. Review the list of access points
found. KickStart will detect the
IP addresses of D-Link DWL-
2210APs. Access points are listed
with their locations, Media Access
Control (MAC) addresses, and
addresses. If you are installing
the first access point on a single-
access-point network, only one
entry will be displayed on this
screen.Verify the
shown here against the hardware
labels for each access point. This
will be especially helpful later
in providing or modifying the
descriptive "Location" name for
each access point.
Click Next.
IP
MAC addresses
23