D-Link AirPremier DWL-2210AP Manual page 102

Configuring Queues for Qualty of Service (QoS)
Navigating to QoS Settings
To set up queues for QoS, navigate to the
as described below.
Configuring QoS Queues
Configuring Quality of Service (QoS) on the D-Link DWL-2210AP consists of setting
parameters on existing queues for different types of wireless traffic, and effectively
specifying minimum and maximum wait times (via Contention Windows) for transmission.
The settings described here apply to data transmission behavior on the access point
only, not to that of the client stations.
For the Guest interface, QoS queue settings apply to the access point load as a whole (both
•
BSSes together).
On a two-radio access point these settings apply to both radios but the traffic for each radio
•
is queued independently. (The exception to this is guest traffic as noted below.)
Internal and Guest network traffic is always queued together within each radio. This is the
•
case on both one-radio and two-radio APs.
Advanced > QoS
102 102
tab, and configure settings