D-Link AirPremier DWL-2210AP Manual page 148

Appendix A: Configuring Security Settings on Wireless Clients
1. Configure the following settings on the Association and Authentication tabs on the
Network Properties dialog.
Association Tab
Network Authentication
Data Encryption
2. Configure this setting on the Authentication tab.
Authentication Tab
EAP Type
3. Click Properties to bring up the Protected EAP Properties dialog and configure the
following settings.
Protected EAP Properties Dialog
Validate Server Certificate
Select Authentication Method
4. Click Configure to bring up the EAP MSCHAP v2 Properties dialog.
On this dialog, disable (click to uncheck) the option to "Automatically use my Windows
login name . . .etc. so that upon login you will be prompted for user name and
password.
Click OK on all dialogs (starting with the EAP MSCHAP v2 Properties dialog) to close
and save your changes.
Logging on to the Wireless Network with a WPA PEAP Client
"WPA with RADIUS" PEAP clients should now be able to associate with the access
point. Client users will be prompted for a user name and password to authenticate
with the network.
WPA
TKIP or AES depending on how this option is configured
on the access point.
Note: When the Cipher Suite on the access point is set
to "Both", then TKIP clients with a valid TKIP key and
AES clients with a valid CCMP (AES) key can associate
with the access point. For more information, see
Administrators Guide and Online Help on the access
point.
Choose "Protected EAP (PEAP)"
Disable this option (click to uncheck the box).
Note: This example assumes you are using the Built-in
Authentication server on the AP. If you are setting up
EAP/PEAP on a client of an AP that is using an external
RADIUS server, you might certificate validation and
choose a certificate, depending on your infrastructure.
Choose "Secured password (EAP-MSCHAP v2)"
148 148