D-Link AirPremier DWL-2210AP Manual page 115

Setting up Guest Access
Configuring the Welcome Screen (Captive Portal)
You can set up or modify the Welcome screen guest clients see when they open a
Web browser or try to browse the Web. To set up the captive portal, do the following.
1. Navigate to the
Enabled
2. Choose
Welcome Screen Text
3. In the
to see on the captive portal.
Update
4. Click to apply the changes.
Using the Guest Network as a Client
Once the guest network is configured, a client can access the guest network as
follows:
1. A guest client enters an area of coverage and scans for wireless networks.
2.The guest network advertises itself via a Guest SSID or some similar name, depending
on how the guest SSID is specified in the Administration Web pages for the Guest
interface.
3. The guest client chooses Guest SSID.
4. The guest client starts a Web browser and receives a Guest Welcome screen.
5. The Guest Welcome Screen provides a button for the client to click to continue.
6. The guest client is now enabled to use the "guest" network.
Advanced > Guest Login
to activate the Welcome screen.
field, type the text message you would like guest clients
tab.
115