Table of Contents
Advertisement
3.1-03
INTRO
BREAKER
TRIP UNIT
LOCKS
ACCESSORIES
Circuit Breaker Security Keylocking
An op onal feature allowing the user to place up to 4 locks
that each can lock the breaker with it's contacts open. Any
a empt to close the breaker, either electrically or manually, is
prevented whilst the lock(s) are in place. The breaker
keylocking device come as two factory mounted accessories.
One for up to 4 Ronis or Profalux keylocks and a second suited
for one Castell lock. The locks can be bought separately and
mounted in the eld.
For instruc ons on how to install the keylocks, see sec on 4 of
this manual.
To engage the device and lock the breaker :
1. Push the breaker OFF bu on un l the padlocking lever
moves and slightly protrudes from the breaker front facia
(Fig.3.1).
2. Rotate the key an clockwise and remove the key.
To disengage the locking feature, simply reinsert the key and
rotate it clockwise. Then make sure that padlocking lever is
ush with the breaker front facia.
Now the breaker can be operated normally.
ON & OFF Pushbu on Padlocking
An op onal feature allowing the user to place padlocks that
deny un-authorized access to the ON & OFF pushbu ons
located on the breaker front facia.
The pushbu on padlocking device accepts one padlock with a
hasp dimension of 3 to 8 mm.
One or both pushbu ons can be selected for padlocking by
moving the individual transparent windows up or down thus
accessing one or both the locking levers holes.
For instruc ons on how to install this device see sec on 4 of
this manual.
3.2 Drawout Breaker Casse e
Casse e Shu er Security Padlocking
A standard feature allowing the user to place padlocks that
will lock the shu er in closed posi on, thus preven ng access
to the casse es main contacts.
The shu er padlocking device accepts up to three padlocks
with a hasp dimension of 3 to 8mm. The device can only be
used when the breaker's mobile por on is in DISCONNECTED
TESTS
APPENDIX
Advertisement
Chapters
Table of Contents
