AEG ME09 Installation, Operation And Maintenance Manual page 64

2.6
2.6-01
INTRO
BREAKER
TRIP UNIT
A
LOCKS ACCESSORIES
2.6 INSTALLATION
Short descrip on
All the ME09 power circuit breakers are equipped with a digital
electronic trip unit available in two basics versions S&N.
Each has a common design that comes with a screen providing
an ammeter and following a simple and accurate menu driven
adjustment of the breaker parameters across a board current
range.
All the func onality is menu driven by using 4 se ng and one
enter key thus allowing a fast and accurate se ng of device.
TRIP UNIT INSTALLATION
1. Loosen the 6 screws (Fig. A) on the breaker fascia assembly
and remove the fascia
2. Mpro Trip unit is mounted on PMU base as shown in Fig. B.
Press the lever and align the trip unit as shown.
3. Insert the trip unit knob into the PMU base properly as shown
in Fig. C
4. Release the lever once the trip unit is insert properly, thus the
release of lever will lock the trip unit to the PMU base as per Fig. D
5. Then install the front cover.
[PMU]
B
TESTS APPENDIX
B
C
D