GE Vivid T8 Basic Service Manual page 235

Software Version check out
Functional Check-out
NOTE:
Vivid T8/ Vivid T8 Pro – Basic Service Manual
5490863-100 English Rev. 03
1. Power on Vivid T8/ Vivid T8 Pro system and wait until
system booting to scanning screen.
If selected to load C Disk only when loading the system
software, the system will display a screen to restore
Computer name before entering the scanning screen.
2. Press Config (F2) on the control panel.
3. Select the About -> System version and check whether
the software version is right.
Figure 8-9. Software version
Loading the software
8-19