Care, Cleaning & Storage - Breville AirRounder Connect Instruction Book

Care, Cleaning
& Storage
The purifier fan heater and filter should be
cleaned at least once every month. Ensure
the purifier fan heater is switched off and
disconnected from the power outlet and allow
all parts to cool before cleaning or storing.
• Use a clean, dry cloth to clean all external
surfaces of the purifier fan heater.
NOTE
More frequent cleaning may be required
depending on environmental conditions.
BREVILLE RECOMMENDS
• Always ensure the purifier fan heater is
turned off, switched off at the power outlet
and unplugged and allow the unit to cool
before performing any cleaning or filter
replacement.
8
DO NOT stick any foreign objects or your
fingers inside the air inlet/outlet of this unit.
8
DO NOT use gasoline, benzine, thinner,
harsh cleaners, etc. on and/or in the unit
while cleaning as they will damage the unit.
8
NEVER use alcohol or other solvents
on this unit.
20
FILTER CARE & CLEANING
WARNING
The filter is not washable. Do not immerse
any part of the air purifier in water as it will
cause damage.
• The Pre-filter should be cleaned at least once
every month using a vacuum cleaner. Gently
vacuum using a hand-tool attachment such
as a brush or upholstery tool. Clean more
often if required (Fig 4).
Fig. 4
• Do not attempt to clean the carbon filter with
a vacuum as this can cause damage.
• Do not use any solutions, hard bristle
brushes or sharp objects to clean as this
can cause damage.
• Replace the filter as indicated using the
following instructions.