Features - Breville AirRounder Connect Instruction Book

Features

WHAT IS THE AIRROUNDER™
CONNECT PURIFIER FAN HEATER?
The Breville AirRounder™ Connect purifier
fan heater features an air purifier, heater and
cooling fan in one.
The Purifier improves your indoor air quality
using 3 distinct levels of protection.
1. A Pre-Filter
Captures larger airborne particles such as
human hair, pet dander and dust particles.
2. A True HEPA Filter
Traps up to 99.97% of fine particles, allergens
and airborne contaminants down to
0.3 microns in size. These include bacteria,
viruses, mould spores, plant spores, and pollen.
3. An Activated Carbon Membrane
Along with assisting in the capture of dust,
smoke, pollen and other airborne allergens, the
activated carbon membrane helps to neutralise
odours in the home and to eliminate fumes
emitted by household products as well as
other volatile organic compounds (VOC's) that
might be found in the air.
SAFETY FEATURES
Safety Tip-Over Cut-Out Switch
There is a tip-over switch inside the purifier
fan heater.
If the purifier fan heater is accidentally tipped
over, the purifier fan heater will stop operating.
Once placed back into the upright position,
press the power button to switch the purifier
fan heater on again.
10
THERMOSECURE™ Protection
Your purifier fan heater is fitted with a safety
device that switches off the purifier fan heater
in the event of overheating. Should this purifier
fan heater stop working, turn off the purifier
fan heater and inspect the air inlet and outlet
for blockages. Wait until the purifier fan heater
is fully cooled for the protection system to reset
before attempting to restart the purifier fan
heater. If the purifier fan heater fails to operate
or the safety device switches off again, take the
purifier fan heater to an authorised Breville
Service Centre for examination or repair.