Wi-Fi Connectivity - Breville AirRounder Connect Instruction Book

Wi-Fi
Connectivity
The Breville AirRounder™ Connect purifier fan
heater can offer remote operation by using a
home Wi-Fi connection and the Breville Home
Connect™ app downloaded to a compatible
mobile phone. through the Google Play store
or Apple App store.
To go straight to the appropriate app store,
scan the QR code below.
For instructions on how to use the app, scan the
QR code below, refer to the Quick Start Guide
that can be found in the box or go to
tinyurl.com/HomeConnectQuickStart.
NOTE
The Breville Home Connect™ app is
compatible with mobile phones running
Android 5.0 or later and iOS devices 9.0
®
or later.
NOTE
To control the purifier fan heater using the app,
the purifier fan heater must be plugged in to an
active power outlet and turned on.
CONNECT YOUR PURIFIER FAN HEATER
TO WI-FI
1. Ensure the mobile device is connected to a
home Wi-Fi network.
2. The purifier fan heater can either be on
standby mode or turned on when setting up.
The symbol will flash fast on the display
panel. The purifier fan heater is now ready
to connect. The symbol stops flashing after
60 seconds but pairing remains possible.
3. Log into your Breville Home Connect™ app
account and stay on the "Home" page. To
add the purifier fan heater to the list. Touch
'Add Device' or the
top right-hand corner of the screen. Follow
the prompts in the app.
4. If the connection is successful, the purifier
fan heater will appear in the main page of
the app and the
purifier fan heater will illuminate.
5. If unsuccessful, press and hold the button
for 3 seconds until the symbol is flashing
slowly. Follow the prompts in the app to
connect in a different mode.
symbol found in the
symbol light on the
17