Care, Cleaning & Storage - Breville Easy Air LAP158 Instruction Book

CONNECT YOUR PURIFIER TO WI-FI
1. Ensure the mobile device is connected to a
home Wi-Fi network.
2. To set up the purifier, turn it on at the power
outlet. The purifier must be turned on via
the control panel. Press and hold the
button for 5 seconds until the
light is flashing rapidly. The purifier is now
ready to connect.
3. Log into your Breville Home Connect ™
app account and stay on the "Home" page.
To add the purifier to the list, touch 'Add
Device' or the
right-hand corner of the screen. Follow the
prompts in the app.
4. If the connection is successful, the purifier
will appear in the main page of the app
and the symbol light on the purifier will
illuminate.
symbol
symbol found in the top
Care, Cleaning
& Storage
The air purifier and filter should be cleaned at
least once every month. Ensure the air purifier
is switched off and disconnected from the
power outlet and allow all parts to cool before
cleaning or storing.
• Use a clean, dry cloth to clean all external
surfaces of the air purifier.
NOTE
More frequent cleaning may be required
depending on environmental conditions.
BREVILLE RECOMMENDS
• Always ensure the air purifier is turned
off, switched off at the power outlet and
unplugged and allow the unit to cool
before performing any cleaning or filter
replacement.
8
DO NOT stick any foreign objects or your
fingers inside the air inlet/outlet of this unit.
8
DO NOT use gasoline, benzine, thinner,
harsh cleaners, etc. on and/or in the unit
while cleaning as they will damage the unit.
8
NEVER use alcohol or other solvents
on this unit.
FILTER CLEANING AND REPLACING
WARNING
The filter is not washable. Do not immerse any
part of the air purifier in water as it will cause
damage.
• The Pre-filter should be cleaned at least once
every month using a vacuum cleaner. Gently
vacuum using a hand-tool attachment such
as a brush or upholstery tool. Clean more
often if required.
• Do not use any solutions, hard bristle
brushes or sharp objects to clean as this
can cause damage.
• Replace the filter as indicated using the
instructions following.
11