Install Workstation In Classic Console Using Slide Tray Mount Option - Honeywell Z4 G4 Planning, Installation And Service Manual

Chapter 3 - Installing
3.5.2 Install workstation in classic console using slide tray mount
option
The following image illustrates a slide tray mounting kit TP-PCMCS1-100 installed in a Classic console,
as would be the case when a new Classic console and slide tray mounting kit is received from a
Honeywell factory.
To install the workstation in classic console furniture using the slide tray
mount option
1. Remove the console door to access the console enclosure.
2. Verify that the slide mount bottom and sides are clear of any installed cables.
3. Using the mounting tray handle, fully extend the tray from the console.
- 34 -