Table of Contents
Advertisement
Chapter 3 - Installing
8. To attach your workstation to a network or broadband device, connect one end of a network cable
to either a network jack or your network or broadband device. Connect the other end of the network
cable to the network adapter port on your workstation. A click indicates that the network cable has
been securely attached.
ATTENTION
Do not plug a telephone cable into the network port.
It is recommended that you use Category 5 wiring and connectors for your network. If you must use
Category 3 wiring, force the network speed to 10 Mbps to ensure reliable operation.
9. Connect the AC power cord.
The following image illustrates the rear view of HP Z4 G4 workstation.
The following table lists the slot numbers for the making the cable connections.
Serial
no
Slot Card
1
0
Power
adapter
harness
2
1
Display
card
3
2
LCNP4e2
4
3
-
Connection from Connection to
D-type Female
External SATA DVD drive power
connector
cable
Mini display port
Monitor
Serial port from
MAU
LCNP4e2
-
-
- 38 -
Advertisement
Table of Contents
