Honeywell Z4 G4 Planning, Installation And Service Manual page 42

Chapter 3 - Installing
7. Insert the round DIN plug of the supplied IKB PS/2 cable (51305381-500) into the PS/2 connector
on the OEP/IKB module assembly (51305776-100).
8. Connect the free end of the IKB PS/2 cable (51305381-500) to the keyboard PS/2 port on the
workstation.
9. Take the DC power cable from the IKB/OEP power supply adapter (51197184-100) and insert the
round DIN plug into the power connector receptacle on the IKB/OEP module assembly/adapter
(51305776-100).
10. Connect the existing OEP/IKB Keyboard HD15 cable to the HD15 OEP/IKB receptacle located on
the IKB/OEP assembly/adaptor (51305776-100). Secure the cable to the assembly/adapter by
tightening the thumbscrews located on the end of the cable.
- 42 -