Table of Contents
Advertisement
3.8.2
Install OEP/IKB adapter
To install OEP/IKB adapter
1. Locate a safe location for the OEP/IKB adapter box and secure it using the supplied Velcro.
2. Locate a safe location to place the OEP/IKB power adapter box and secure it using the supplied
Velcro.
3. If the IKB has a trackball, connect it to the mouse PS/2 port on the workstation.
4. Locate and connect the male end of the DB9 M/F COM port cable (51196990-500) to the COM port
on the OEP/IKB module assembly/adapter (51305776-100).
5. Secure the connection by tightening the thumbscrews located on the cable end.
6. Connect the female end of the DB9 M/F COM port cable (51196990-500) to COM 1 port located on
the back panel of the workstation and tighten the thumbscrews.
Figure 3.4 OEP/IKB adapter connections for IKB with Annunciator relay
- 41 -
Chapter 3 - Installing
Advertisement
Table of Contents
