Honeywell Z4 G4 Planning, Installation And Service Manual page 58

4. While wearing a grounded ESD wrist strap, grasp the LCNP4e2 card in PCIe Slot 2 at the corners
and gently remove the existing card.
5. Insert the replacement LCNP4e2 board assembly in the PCIe slot 2 as illustrated in the following
image.
6. Replace the cardholder and card retention arm, and ensure that the tab locks in its place.
7. Replace the workstation cover and place the workstation in the furniture. Refer to the section,
Installing for installing the workstation in the furniture.
- 58 -
Chapter 5 - Servicing