Mounting The Cabinet; About The Cabinet - Honeywell MAXPRO MPIP2000U Series Installation And Setup Manual

Honeywell MAXPRO Intrusion MPIP2000U/3000U Series
3.2

Mounting the Cabinet

3.2.1

About the Cabinet

The MPI cabinet is suitable for housing an MPI Control Panel or a Remote
Power Supply, and comes with a built-in AC power adapter and a door tamper
switch. Furthermore, the cabinet can house up to two backup batteries (18 Ah
max. capacity). The cabinet can contain:
An MPI Control Panel + optionally:
l
one additional device on top of the main board holder: either a Zone
o
Expander or a Relay Module.
an LTE module.
o
An MPI Remote Power Supply (RPS) + optionally:
l
up to two additional devices; one to the right of the RPS and one on top
o
of the RPS holder.
Suitable devices are: Door Control Modules, Zone Expanders, and Relay
Modules.
You can find a few example configurations below.
The image below shows a cabinet with a Control Panel (B), a Zone Expander
(A) on top, and the 4G/LTE Module (C) on the right-hand side.
800-23044 Rev. A draft_11
A
G F E
Installation and Setup Guide
B C
D
25