Installation and Setup Guide
4.2.4
Installing the 4G/LTE Module in the Cabinet
To install the 4G/LTE module in the cabinet, proceed as follows:
1.
Insert the alignment pegs (H) in the cabinet mounting holes (second set
from the right). Use the indicator arrows on the module housing as a
guide. Note: For clarity, the control panel and the SMA cables in the
illustration below have been omitted.
2.
Fix the module in place using the screw (D).
52
Honeywell MAXPRO Intrusion MPIP2000U/3000U Series
H
H
800-23044 Rev. A draft_11
D