Update Firmware - Honeywell BW Flex Series User Manual

Update Firmware

The firmware can be updated via an IntelliDoX Docking Station (see the IntelliDoX user Manual),
SSDC, or Device Configurator app.
Update Firmware via DC
Update the firmware via the Device Configurator app on a mobile device.
1. Open the Device Configurator app on your mobile device and pair it with your detector.
2. Tap Menu
3. Tap Firmware
4. Tap Update
5. Tap YES to start the Firmware update, and wait until the "Update Successfully" system
message is displayed. The detector goes to the Regular mode.
Update Firmware via SSDC
1. Connect the detector to Safety Suite Device Configurator via IR Link or Bluetooth
2. Select the detector in the Device List to enter the configuration page
3. Safety Suite Device Configurator checks new firmware automatically after it connects to the
Internet. The UPDATE is available when there is a new firmware release. Click UPDATE to
start the firmware update.
BW Flex Series 36 User Manual