Honeywell BW Flex Series User Manual page 36

Charge the battery via the USB Charger
1. Press and hold the button to deactivate the detector.
2. Plug the USB charger into an USB port.
3. Attach the charging adapter to the charging Port.
Charge the battery via the Cradle Charger
1. Deactivate the detector.
2. Insert the detector into the detector bay and press down firmly on the detector to ensure
contact between the detector and the contact pins. The detector can be activated during
charging.
3. After charge is complete, the full battery icon is displayed
4. Remove the detector.
Note: For further information, refer to the Cradle Charger User Manual.
BW Flex Series
Battery charging when the detector is OFF.
Battery charging when the detector is ON.
35 User Manual