Advertisement
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
4. To navigate the list of parameters, press CTRL + N.
5. To configure the APN, press the number next to the Data I/O APN parameter,
DATA I/O APN ?[ ] = ?
6. Type the new APN, and then press ENTER.
7. Restart the HDU.
E. Configuring NAV
The Aspire-200 uses information from the aircraft's navigation system to steer the
antenna. To operate the system, you must configure the type of navigational
information available to the HDU and the transmission speed of NAV buses..
To configure the NAV:
1. Connect to the HDU maintenance port—see "Connecting to the Aspire-200
2. In the maintenance menus, to navigate to menu 3, press CTRL + N.
3. In menu 3, to access miscellaneous EEPROM parameters, press m.
MISCELLANEOUS PARAMETERS
88
CHANNEL CARD CONFIGURATION
89
DATA I/O ETHERNET DUPLEX MODE
90
DATA I/O APN
91
MIN SAT LOOK ANGLE
92
PREEMPTABLE CALLS
93
BGAN/SWIFT64 HYSTERESIS TIMEOUT
94
ANTENNA MOUNTING ANGLE (ROLL)
95
ANTENNA MOUNTING ANGLE (PITCH)
96
ANTENNA MOUNTING ANGLE (ROTATION)
97
RT-CHANNEL RESERVED POWER
WHICH PARAMETER #
4. To navigate the list of parameters, press CTRL + N.
5. To configure the NAV1 type, press the number next to the NAV1 Type
NAV1 TYPE INERTIAL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Aspire-200
and then press ENTER.
The Data I/O APN prompt appears.
You can restart the HDU using menu 2, option Z.
Maintenance Port" on page 1.
The list of miscellaneous EEPROM parameters appears.
99
100
101
104
105
106
107
108
109
<CTRL> N for next page
parameter, and then press ENTER.
The NAV1 Type prompt appears.
0=INERTIAL
1=GNSS
VSWR ERROR THRESHOLD
NAV1 TYPE
NAV2 TYPE
MAXIMUM IGA POWER
MAX ORDER FOR INTERMOD CHECK
ENABLE PAP
PAP USER NAME
PAP PASSWORD
LNA TO SDU RX THRESHOLD
?
2=HYBRID
7=AHRS
8=FMS
23-15-45
= ?
Page 5-5
28 Feb 2018
Advertisement
