Advertisement
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
5. Cabling Requirements
In single point cabling, the cable shield is terminated at one end only via a connector or suitable crimp
terminal.
Table 4-3 Cable Shielding and Termination Specifications
Cable
Power Lines
Serial Data (RS-232)
Ethernet Data
ISDN Data
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Aspire-200
Figure 4-2 Remote Lamp Panel Circuit
Remote lamps are available on connector pins:
•
MP-10A—Power
•
MP-10B—Channel available.
Conductor Type
Single conductor, stranded
Twisted pair, stranded
Twisted pair, stranded
Single
Multiple
Point
Point
N/A
N/A
N/A
Yes
85%
Yes
85%
Yes
85%
23-15-45
Minimum
Conductor
Coverage by
Shield
Page 4-17
28 Feb 2018
Advertisement
