Advertisement
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
pinout tables for all the connectors
•
Installation—information and procedures for the installation of the Aspire-200
•
System Setup—information and procedures for setting up the system after installation
•
Troubleshooting—troubleshooting information and where to find it
•
Specifications—environmental specifications for every piece of equipment available with the Aspire-200
•
Glossary.
4. Precautions
When working with AMT-1800, AMT-3500, AMT-3800, and AMT-700 antennas, be aware of the following
warnings and cautions.
WARNING: THIS EQUIPMENT RADIATES HIGH FREQUENCY RADIATION AND POSES A
RADIATION HAZARD. SERVICE TECHNICIANS AND OPERATORS MUST EXERCISE
CARE TO KEEP CLEAR OF THE ANTENNA'S BEAM WHILE PERFORMING
OPERATIONAL TESTS OR INSTALLATION VERIFICATION PROCEDURES.
FOR INSTALLATION WHERE RF COMPOSITE AVERAGE POWER DOES NOT EXCEED
30W, DO NOT APPROACH WITHIN 12 FEET (3.5 METRES) OF THE ANTENNA DURING
ANTENNA OPERATION (TRANSMISSION).
DURING ANTENNA OPERATION (TRANSMISSION), ENSURE MINIMUM EXPOSURE OF
ALL PERSONNEL TO ANY REFLECTED, SCATTERED, OR DIRECT BEAMS.
CAUTION: SERVICE TECHNICIANS MUST OBEY STANDARD SAFETY PRECAUTIONS, SUCH AS
WEARING SAFETY GLASSES, TO PREVENT PERSONAL INJURY WHILE INSTALLING
OR PERFORMING SERVICE ON THIS UNIT.
When working with avionics and satellite communications equipment, be aware of the following warnings
and cautions.
CAUTION: TURN OFF POWER BEFORE DISCONNECTING ANY TERMINAL FROM WIRING.
DISCONNECTING THE TERMINAL WITHOUT TURNING POWER OFF MAY CAUSE
VOLTAGE TRANSIENTS THAT CAN DAMAGE THE TERMINAL.
CAUTION: THIS EQUIPMENT INCLUDES ITEMS THAT ARE ELECTROSTATIC DISCHARGE
SENSITIVE (ESDS) DEVICES. ESDS DEVICES ARE SUBJECT TO DAMAGE BY
EXCESSIVE LEVELS OF VOLTAGE AND/OR CURRENT. THE LOW-ENERGY SOURCE
THAT MOST COMMONLY DESTROYS ESDS DEVICES IS THE HUMAN BODY, WHICH,
IN CONJUNCTION WITH NONCONDUCTIVE GARMENTS AND FLOOR COVERINGS,
GENERATES AND RETAINS STATIC ELECTRICITY. TO ADEQUATELY PROTECT ESDS
DEVICES, THE DEVICE AND EVERYTHING THAT CONTACTS IT MUST BE BROUGHT
TO GROUND POTENTIAL BY PROVIDING A CONDUCTIVE SURFACE AND DISCHARGE
PATHS. USE STANDARD INDUSTRY PRECAUTIONS TO KEEP RISK OF DAMAGE TO A
MINIMUM WHEN TOUCHING, REMOVING, OR SERVICING THE EQUIPMENT.
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Aspire-200
23-15-45
Page 1-3
28 Feb 2018
Advertisement
