Advertisement
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
This manual provides information about the installation, operation, and maintenance of the eNfusion®
Aspire-200.
1. Scope
This manual provides detailed information for avionics technicians about the wiring, installation, and setup
of every component of the Aspire-200. The installer is responsible for the approval and certification of system
components on the aircraft, and for the installation of wiring in the aircraft.
This manual includes information for end users about how to operate the Aspire-200.
2. Part Numbers
This manual applies to the Aspire-200 kits below:
•
1541-K-1015-01—Low Gain Antenna (LGA) with CCU-200
•
1541-K-1007-01—AMT-3500 Intermediate Gain Antenna (IGA)
•
1541-K-1007-42—AMT-1800 IGA
•
1541-K-1007-02—AMT-1800 IGA with CCU-200
•
1541-K-1007-32—AMT-1800 IGA with CNX-250
•
1541-K-1006-01—AMT-700 High Gain Antenna (HGA) with CCU-200
•
1541-K-1006-02—AMT-3800 HGA with CCU-200
1541-K-1007-11
•
1541-K-1007-12
•
1541-K-1007-52
•
1541-K-1006-11
•
1541-K-1006-31
•
1541-K-1006-51
•
1541-K-1006-12
•
1541-K-1006-32
•
1541-K-1006-52
•
The part numbers of the Line Replaceable Units (LRUs) are:
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Aspire-200
ABOUT THIS MANUAL
AMT-3500 IGA with CNX-200
—
AMT-1800 IGA with CNX-200
—
AMT-1800 IGA with CNX-900
—
AMT-700 HGA with CNX-200
—
AMT-700 HGA with CNX-250
—
AMT-700 HGA with CNX-900
—
AMT-3800 HGA with CNX-200
—
AMT-3800 HGA with CNX-250
—
AMT-3800 HGA with CNX-900.
—
23-15-45
Page 1-1
28 Feb 2018
Advertisement
