Advertisement
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
3. Mechanical Installation
This section includes information about installing the equipment in the core Aspire-200. Contact Honeywell
about installation kits that include mating connectors and cables.
A. HDU
Carlisle Part
120-29256-101
120-29256-102
120-29256-103
120-232154-101
120-232154-102
120-232154-103
120-29255-101
120-21002-102
120-21002-104
6092-101
200-91002-101
6092-102
200-92144-101
6054-101
6051-101
B. IPLD
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Aspire-200
Install the HDU in a standard 2-MCU rack. The Aspire-200 ships only the equipment
in the core system. The customer is responsible for the mounting tray, mating
ARINC 600 connector and cables.
Carlisle Interconnect Technologies supplies 2-MCU ARINC 600 shipping kits in
various configurations, provided in Table 4-1. You can contact Carlisle at
www.carlisleit.com.
Table 4-1 Carlisle Kits
Aspire-200 Install Kit (AMT-700)
Aspire-200 Install Kit (AMT-1800/3500/3800)
Aspire-200 Install Kit (LGA)
Aspire-200 Install Kit (AMT-700) tray with isolators
Aspire-200 Install Kit (AMT-1800/3500/3800) tray with isolators
Aspire-200 Install Kit (LGA) tray with isolators
Female DB26 kit for Aspire-200 SCM
CCU-200 connector kit
CCU-200 wire kit
2 MCU S/S W/ BOTTOM AC FAN
2 MCU S/L W/REAR AC FAN
2 MCU S/S W/BOTTOM DC FAN
2 MCU S/L W/REAR DC FAN
2 MCU S/S NO FAN
2 MCU S/L NO FAN
The HDU rear connector is RADIALL NSXF1R101Y0012. The mating connector is
supplied by the customer.
You can install the IPLD in one of two orientations described in Figure 3-3 on page
3-5.
Description
23-15-45
Page 4-2
28 Feb 2018
Advertisement
