Advertisement
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
SATELLITE SERVICES (A=AERO S=SWIFT64 B=SBB) (ie, AB) ?
9. To accept the existing value, press ENTER.
10. Restart the HDU.
To configure an LES ID for all Ocean Regions:
1. Connect to the HDU maintenance port—see "Connecting to the Aspire-200
2. In the maintenance menus, press CTRL + N to navigate to menu 3.
3. In menu 3, to access Ocean Region Parameters, press i.
This command sets the LES id's in all the ocean regions to the same
provider LES id ?
4. Type the LES ID and press ENTER.
D. Configuring the APN
The APN enables the Aspire system to access your SBB service provider's network.
Contact your service provider to obtain your APN.
To configure the APN:
1. Connect to the HDU maintenance port—see "Connecting to the Aspire-200
2. In the maintenance menus, press CTRL + N to navigate to menu 3.
3. In menu 3, to access miscellaneous EEPROM parameters, press m.
MISCELLANEOUS PARAMETERS
88
CHANNEL CARD CONFIGURATION
89
DATA I/O ETHERNET DUPLEX MODE
90
DATA I/O APN
91
MIN SAT LOOK ANGLE
92
PREEMPTABLE CALLS
93
BGAN/SWIFT64 HYSTERESIS TIMEOUT
94
ANTENNA MOUNTING ANGLE (ROLL)
95
ANTENNA MOUNTING ANGLE (PITCH)
96
ANTENNA MOUNTING ANGLE (ROTATION)
97
RT-CHANNEL RESERVED POWER
WHICH PARAMETER #
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Aspire-200
You can restart the HDU using menu 2, option Z.
Maintenance Port" on page 1.
The LES OD prompt appears.
Maintenance Port" on page 1.
The list of miscellaneous EEPROM parameters appears.
<CTRL> N for next page
99
VSWR ERROR THRESHOLD
100
NAV1 TYPE
101
NAV2 TYPE
104
MAXIMUM IGA POWER
105
MAX ORDER FOR INTERMOD CHECK
106
ENABLE PAP
107
PAP USER NAME
108
PAP PASSWORD
109
LNA TO SDU RX THRESHOLD
?
23-15-45
Page 5-4
28 Feb 2018
Advertisement
