Advertisement
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
1. Setting up Operational Parameters
After the Aspire-200 is installed in the aircraft, you must configure fundamental parameters in order to operate
the system:
•
Cable losses
•
LES IDs
•
The APN
•
Navigational input to the system.
A. Connecting to the Aspire-200 Maintenance Port
B. Configuring Cable Loss
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Aspire-200
SYSTEM SETUP
You can connect to the Aspire-200 through the maintenance port.
To connect to the maintenance port:
1. Connect your computer to the front-panel maintenance port with the
maintenance cable, PN 1541-F-3150, provided in the shipping kit.
2. Start a HyperTerminal session on an active COM port with the following
parameters:
Parameter
Bits per second
Data bits
Parity
Stop bits
Flow control
3. Type the password maint.
The password does not appear on screen.
Menu 1 appears when you connect.
The signal loss in cables between the IPLD and the antenna affect the power
required to access Inmarsat services. After you install the system, measure the
cable loss and configure the IPLD-to-antenna cable loss parameter.
Value
19200
8
None
1
None
23-15-45
Page 5-1
28 Feb 2018
Advertisement
