Column Installation - GE AKTA ready Operating Instructions Manual

9 Column installation

9 Column installation
About this chapter
This chapter describes how to install a column on the ÄKTA ready. Much of the information
in this chapter is available under Column Installation of the ÄKTA ready installation
wizard (part of supplied software).
The chapter also contains instructions for running an efficiency test and for column
rinsing. Both are optional procedures that can be performed in connection with installing
a new column. Note that ReadyToProcess columns are factory tested and are supplied
with a certificate stating the results from an efficiency test performed on the individual
column.
Precautions
•
•
122
WARNING
Before attempting to perform any of the procedures described in
this chapter, you must read and understand all contents of the
corresponding section(s) in the
page 15
General precautions, on page 15
Operation, on page 19
as listed below:
Section 2.1 Safety precautions, on
ÄKTA ready Operating Instructions 28960345 AD