Creating A Method - GE AKTA ready Operating Instructions Manual

10 Creating a method

About this chapter
This chapter describes how to create a method for ÄKTA ready in the UNICORN 5 Method
Editor. The same principles for method creation applies for UNICORN 7 but the dialog
boxes and menu options may differ. See UNICORN Method Manual for more information
on how to create methods.
In a simple example the general structure of a method is shown, along with the different
steps required to create it. There is also a section discussing the wizard for creating test
methods for efficiency testing of columns.
Note that the discussion in this chapter applies to methods written for the ÄKTA ready
strategy. For information about methods in general, and for detailed information about
the Method Editor, please see the UNICORN manuals.
Courses in UNICORN system control, including method design, are available from Fast
Trak Training & Education. Contact your local GE Healthcare representative for informa-
tion.
In this chapter
This chapter contains the following sections:
Section
10.1 The Method Editor
10.2 An example of using the Method Editor
10.3 Creating a column efficiency test
ÄKTA ready Operating Instructions 28960345 AD
10 Creating a method
See page
142
152
168
141