GE AKTA ready Operating Instructions Manual page 46

3 System description
3.3 Flow chart
Part
XV-051 to XV-056
PT-111 to PT-113
AE-121
FE-141
TE-161
CE-101
AE-131
AT-221
HV-301
P-201
P-202
See
above.
Note:
From inlet to column
Stage
1
2
3
46
Section 3.4 Equipment, on page 48
The gradient pump (P202) is described in
page 97.
Description
Inlet valves open the appropriate inlet (XV-001 to XV-006 in chart) for sample
or buffer.
The system pump (P-201) and the gradient pump (P-202) deliver the liquid
to the column via a pressure sensor cell (PT-111) and, if preferred, via the
air trap (AT-221), where air in the liquid is removed.
There are two sets of valves between the pump and the column:
the air trap manifold, which allows for bypassing the air trap, and
•
the column manifold, which allows for bypassing the column.
•
Function
Outlet 1 to 6, grouped in Outlet Manifold
3 Pressure sensors cells
pH electrode (optional)
Flow meter cell
Temperature sensor
Conductivity sensor
UV cell
Air trap
Air vent valve
System pump
Gradient pump (optional)
for more information about the parts in the table
ÄKTA ready Operating Instructions 28960345 AD
Chapter 7 ÄKTA ready gradient, on