System Log - D-Link DPN-101G User Manual

Section 3 - Configuration
Choose Admin > System Log, the page shown in the following figure appears. This page is used to display the system event log table. By checking
Error or Notice (or both) will set the log flag.
The following table describes the parameters of this page:
Field
There have different level of log to be record
Log/Display Level
and display.
User can select Local or Remote. If select
Mode Remote, user should also configure the IP
address and UDP port of the Log server.
Save Log to File Save the log file to local hard disk.
Clear Log Clean up the current Log on the device.
D-Link DPN-101G User Manual

System Log

Description
36