Optional Kits - Cisco ONS 15454 Unpacking And Installing

Central Office Power to FAP
Connect the CO power to the FAP according to local site practice.
CO power from the BDFB to the bay assembly must be a direct feed from a single breaker (one breaker
Note
for return, and one breaker for -48VDC) at the BDFB to the input connection of the bay assembly. The
size or gauge of the power wire feed must be calculated by the distance from the BDFB to the FAP.

Optional Kits

There are four optional kits that can be ordered separately as needed for cable protection, aisle guards,
and supplementary installation components. This section lists the kits by product name, title, and part
number and provides descriptions for each kit.
Table 3
Product Name
15454-BAY-EXT=
15454-BAY-COVER=
15454-BAY-GUARD=
15454-BAY-ACC1=
15454 Bay Extender Kit (2.38-inch)
The 15454 Bay Extender Kit provides rear cable protection, additional cable management space and
includes a 2.38-inch vertical extender
78-15720-04
Optional Kits
Title
15454 Bay Extender Kit (2.38-inch)
15454 Bay End Plate Cover Kit
15454 Bay End Guard Kit
15454 First Aid Kit
(Figure
Unpacking and Installing the Cisco ONS 15454 Four-Shelf and Zero-Shelf Bay Assembly
Part Number
74-2794-01
74-2795-01
74-2796-01
53-2073-01
32) and extender base (Figure 33
Optional Kits
and Figure 34).
33