Optional Msc, Fp, Plim, Sip, And Spa Product Ids - Cisco CRS-1 System Description

Product IDs
Component Product ID
Switch fabric handle CRS-8-FC-HANDLE(=)
Route processor card
4
Route processor (RP) CRS-8-RP(=)
Route processor, CRS-8-RP/R(=)
redundant
Route processor CRS-MEM-2G(=)CRS-MEM-4G(=)
memory
Route processor blank CRS-8-RP-BLANK(=)
Performance route CRS-8-PRP-6G(=)
5
processor (PRP)
CRS-8-PRP-12G(=)
Route processor CRS-8-RP-HANDLE(=)
handle
3
PM = power module
4
RP = route processor
5
PRP = performance route processor

Optional MSC, FP, PLIM, SIP, and SPA Product IDs

Table 23: MSC Component Product IDs, on page 90
90 list the product IDs for the modular services cards (MSCs) and physical layer interface modules (PLIMs)
available for the Cisco CRS 8-slot Line Card Chassis Enhanced router.
Note For a complete list of PLIM product IDs, see the
Interface Module Installation Note
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/shared_port_adapters/install_upgrade/crs/crs1/
installation/guide/spahw.html
. For a complete list of SIP and SPA product IDs, see the
Cisco CRS SIP and SPA Hardware Installation Guide .
Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Enhanced Router System Description
Optional MSC, FP, PLIM, SIP, and SPA Product IDs
Description
Handle for carrying card (spare)
Cisco CRS RP card(one required
for each chassis; for redundant
operation, you also need
CRS-8-RP/R=)
Optional route processor for
redundant RP operation(one
required for each chassis, along
with CRS-8-RP=)
RP memory module, 2 gigabytesRP
memory module, 4 gigabytes
Blank card carrier for each route
processor slot(used during
shipment, must be replaced by a
route processor card)
Cisco CRS performance route
processor card
Handle for carrying card (spare)
and Table 24: PLIM Component Product IDs, on page
Cisco CRS Carrier Routing System Ethernet Physical Layer
89