Cisco ONS 15454 Unpacking And Installing page 13

To route fiber, unscrew and remove the covers on the base plate and extender bases
Step 2
Figure 8
Fiber routing
Extender base
(covers removed)
When the covers have been removed, you have access to the base of the rack and any holes previously
cut into the raised floor tile, as shown in
Figure 9
78-15720-04
Base Plate and Extender Bases with Covers Removed
(slid out from rack and
covers removed)
Raised Floor Base Fiber Routing Close-up
Unpacking and Installing the Cisco ONS 15454 Four-Shelf and Zero-Shelf Bay Assembly
Base plate
Figure 9.
Installation Instructions
(Figure 8).
Fiber guide
ONS 15454 node
Fiber routing
Extender base
(covers removed)
13