Cisco 700 Series Administration Manual page 17

Cisco Headset 700 Series Administration on Cisco Unified Communications Manager
Parameter
Microphone Gain
Sidetone
Equalizer
Audio Bandwidth
Bluetooth
Conference
Range Default
Softer – Louder Default
Off – High Low
Warmest – Brightest Default
Wide Band, Narrow Wide
Band Band
On, Off On
On, Off On
Headset Template Management
Notes
Gain controls how loud the user sounds to other
people on the call. Softer means users sound
quiet while Louder means users sound much
louder.
Configure this setting based on the ambient
noise in the office environment.
This parameter applies to all headsets in the
Cisco Headset 500 Series.
Controls how much of a user's own voice they
can hear through their headset.Off turns off the
sidetone while High means that users receive
much more feedback from their headset
microphones.
This parameter applies to all headsets in the
Cisco Headset 500 Series.
Controls the Equalizer settings. Warmer settings
mean users hear more bass in their headsets,
while a brighter setting means users hear more
treble.
This parameter applies to all headsets in the
Cisco Headset 500 Series.
Controls the Digital Enhanced cordless
Telecommunications (DECT) codec in the Cisco
Headset 560 Series.
In a dense DECT environment, set the field to
Narrow Band to limit the Cisco Headset 560
Series to the G.726 codec.
Controls the use of Bluetooth on the Cisco
Headset 560 Series with Multibase. When this
parameter is set to Off, the base deletes all
devices paired with it.
Note You can disable Bluetooth if your
users are operating in an
environment in which information
security is at a premium.
Controls the use of the conferencing feature on
the Cisco Headset 560 Series. Conferencing
allows up to three guest headsets to pair with
the same base at once.
See Cisco Headset 500 Series User Guide for
more information on conferencing.
Cisco Headset 700 Series Administration Guide
13