C-Arm Brake Adjustment - GE Alpha RT 32551 Installation Instructions Manual

5 Setups, alignments and adjustments
Date:
Film type:
Water temp:
Gross fog:
Date:
Film type:
Water temp:
Gross fog:
Date:
Film type:
Water temp:
Gross fog:
Table 5.5 Film processor evaluation
9 Mark the DATE on this file for future reference.
5.2.3

C-arm brake adjustment

Check that the brake has 170 N (38 lbs) of holding force measured at the
cassette holder; if not, open the side covers of the carriage and tighten the
nyloc nuts (3).
If the brake does not release properly, open the nuts (1) and adjust the
space (4) with the screws (2). The space should be about 0.1 to 0.4 mm.
CAUTION!
Make only minor adjustments of the nyloc nuts - measured by the flats of
the nuts.
64
Time:
Dev temp:
Speed index:
Contrast
index:
Time:
Dev temp:
Speed index:
Contrast
index:
Time:
Dev temp:
Speed index:
Contrast
index:
GE Healthcare 32551-IMG rev 6