Carriage Lock; Recommended Adjustments - Grizzly G9972Z Owner's Manual

Carriage Lock

The carriage is supplied with a lock bolt on the
front right-hand side of the saddle (see Figure 12).
This bolt locks the carriage in place for increased
rigidity when making face cuts. This lock bolt must
be loosened before attempting to move the car-
riage manually or with the power feed.
Lock Bolt
Figure 12. Carriage lock bolt.
Model G9972Z (Mfd. Since 03/20)
Recommended
Adjustments
For your convenience, the adjustments listed
below have been performed at the factory.
However, because of the many variables involved
with shipping, we recommend that you at least
verify the following adjustments to ensure the best
possible results from your new machine.
Step-by-step instructions for these adjustments
can be found in the SERVICE section starting on
Page 55.
Factory adjustments that should be verified:
Cross slide backlash adjustment (Page 58)
•
Gib adjustments (Page 59)
•
-21-