Draytek VigorAP 802 User Manual page 79

Configuration
DNS Server IP Address
After finishing this web page configuration, please click OK to save the settings.
as a client and can be managed / controlled by AP Management server
offered by Vigor router (e.g., Vigor2862).
IP Address – Type in private IP address for connecting to a local
private network (Default: 192.168.1.2).
Subnet Mask – Type in an address code that determines the size of
the network. (Default: 255.255.255.0/ 24)
Enable Management VLAN – VigorAP 802 supports tag-based VLAN
for wireless clients accessing Vigor device. Only the clients with the
specified VLAN ID can access into VigorAP 802.
VLAN ID – Type the number as VLAN ID tagged on the

transmitted packet. "0" means no VALN tag.
Primary IP Server - You must specify a DNS server IP address here
because your ISP should provide you with usually more than one DNS
Server. If your ISP does not provide it, the modem will automatically
apply default DNS Server IP address: 194.109.6.66 to this field.
Secondary IP Server - You can specify secondary DNS server IP
address here because your ISP often provides you more than one DNS
Server. If your ISP does not provide it, the modem will automatically
apply default secondary DNS Server IP address: 194.98.0.1 to this
field.
73