Table of Contents
Advertisement
The access point can act as a wireless repeater; it can be Station and AP at the same time. It can use
Station function to connect to a root AP and use AP function to serve all wireless stations within its
coverage.
Note:
While using Universal Repeater mode, the access point will demodulate the received signal.
Please check if this signal is noise for the operating network, then have the signal modulated and
amplified again. The output power of this mode is the same as that of AP mode.
Available settings are explained as follows:
Item
Universal Repeater Parameters
SSID
MAC Address
(Optional)
Channel
Description
Display the SSID defined for Range Extender operation mode in Quick
Start Wizard.
Change the name of SSID whenever you want.
Type the MAC address of access point that VigorAP 802 wants to
connect to.
Means the channel of frequency of the wireless LAN. You may switch
channel if the selected channel is under serious interference. If you
have no idea of choosing the frequency, please select AutoSelect to
69
Hide quick links:
Advertisement
Table of Contents
