Draytek VigorAP 802 User Manual page 33

It is the simplest way to build connection between wireless network clients and VigorAP 802. Users
do not need to select any encryption mode and type any long encryption passphrase to setup a
wireless client every time. He/she only needs to press a button on wireless client, and WPS will
connect for client and VigorAP 802 automatically.

Note:
Such function is available for the wireless station with WPS supported.
There are two methods to do network connection through WPS between AP and Stations: pressing
the Start PBC button or using PIN Code.
On the side of VigorAP 802 series which served as an AP, press WPS button once on the front panel
of VigorAP 802 or click Start PBC on web configuration interface. On the side of a station with
network card installed, press Start PBC button of network card.
If you want to use PIN code, you have to know the PIN code specified in wireless client. Then provide
the PIN code of the wireless client you wish to connect to the VigorAP 802.
27