Cisco ONS 15310-MA SDH Procedure Manual page 5

Chapter 1 Install the Cisco ONS 15310-MA SDH
NTP-H149 Unpack and Inspect the ONS 15310-MA SDH Shelf
Assembly
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Complete the
Step 2
Continue with the
Step 3
Stop. You have completed this procedure.
NTP-H150 Install the Shelf Assembly
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Note The ONS 15310-MA SDH installations are suitable for Network Telecommunication facilities and
locations where NEC are applicable.
78-18668-01
This procedure describes how to unpack the ONS 15310-MA SDH and
verify the contents.
None
Required
Onsite
None
"DLP-H1 Unpack and Verify the Shelf Assembly" task on page
"DLP-H2 Inspect the Shelf Assembly" task on page
"NTP-H150 Install the Shelf Assembly" procedure on page
This procedure describes how to mount ONS 15310-MA SDH shelf
assemblies in a rack.
#2 Phillips screwdriver
#12-24 mounting screws (4)
#10-32 ear mounting screws (8)
Universal mounting ears (2)
Dual-assembly plate
19-inch-rack mounting ear
Fuse and alarm panel, if not installed
NTP-H149 Unpack and Inspect the ONS 15310-MA SDH Shelf Assembly,
page 1-5
Required
Onsite
None
Required Tools and Equipment
16-1.
Cisco ONS 15310-MA SDH Procedure Guide, R9.0
16-1.
1-5.
1-5