Honeywell 400 Series Hardware Manual page 44

; .
OPERATE HA
LT
ALE RT
Figure 9. CRD150/CRZZOO Control Panel
OPERATE/ RESET pushbutton and Pressing this control when the RESETindicator
indicator (green/blue) is on clears the Attention status, provided
' the operator has corrected all inOperable
' conditions. The OPERATE indicator glows
green when the card reader is ready to operate.
The OPERATE indicator goes off and RESET
glows blue to indicate that:
1. ' Power was turned on for the first time.
2. HALT was actuated.
3. One of the following conditions exists:
Hopper Empty
Stacker Full
Read Alert
Feed Alert
Sneak Feed
Card Jam
Last Batch.
Halt status. Both HALT and RESET glow while
the subsystem is in this state.
-35-