Honeywell 400 Series Hardware Manual page 35

CONTROL/INDIC ATOR
MANUAL HALT pushbutton and
indicator (blue)
READ ALERT indicator (red)
HOPPER ALERT indicator (blue)
FEED ALERT indicator (red)
LAST BATCH pulhbutton and indicator
(white)
FUNC TIONS
1. Input happer empty.
Output stacker full.
A card was improperly stacked.
The correct card-length control rail or
a stacker bumper is not in place.
Indicator glows when a feed failure or a sneak
feed occurs. NOTE: When asneakfeed occurs,
READ ALERT also comes on.
Pressing this control when the indicator is off
turns on the indicator and enables the last-
batch circuit. When the hopper goes empty,
the last-batch state exists.
Pressing the control when the circuit is enabled
resets the control to the off state and turns
off the indicator.
-26..