Load Media For Peel-Off Printing - Honeywell PX940 User Manual

5.
6.
7.
Note: Honeywell recommends using non-perforated labels when using rewinder mode.

Load Media for Peel-Off Printing

Follow steps 1-9 from Load Media for Tear-Off Printing, then:
1.
2.
3.
4.
PX940 User Guide
Lock the Rewind/Liner Take-Up knob into closed position.
Put media roll holder in place.
Go to Main Menu > Setting > Printing > Media > Printing Mode, select
Rewind from the list.
Insert the media in the opening between the label dispenser and the platen
roller.
Insert an empty media core onto the rewinder take-up hub.
Round the liner through the media rewinder and tape leading edge of label to
the empty media core to secure position.
Pull the liner tight and lock the Rewind/Liner Take-Up knob into closed
position.
17