Back View (Ports And Power); Print Button; Ready Screen - Honeywell PX940 User Manual

Back View (Ports and Power)

Print Button

Use the Print button to feed media, pause print jobs, calibrate, test feed, and print.
Printer State
Startup
Ready
Printing
Paused
Error

Ready Screen

The Ready Screen appears when the printer is powered on and has completed its
startup process.
Note: The icon for Wi-Fi status appears only when the optional Wi-Fi module is installed.
2
Ethernet Port
IEEE 1284 Port
(Optional)
Print Button Action
Press the Print button during startup to enter Calibration mode or to restore
defaults if the printhead is lifted.
Press the Print button to advance the media.
If the print key feature is on, press the Print button to reprint the last job.
Press and hold the Print button to calibrate the media sensors.
Press the Print button to stop or pause printing. The printer stops after
completing the current label.
Press the Print button to resume printing.
Press the Print button to advance the media.
IEEE 802.11 Port
(Optional)
RS-232 Serial Port
USB Device Port
USB Host Port
On/Off Switch
AC Power
PX940 User Guide